天游平台

    <meter id="ikmyk"><strong id="ikmyk"><s id="ikmyk"></s></strong></meter>
    <small id="ikmyk"></small>
    <mark id="ikmyk"><u id="ikmyk"><span id="ikmyk"></span></u></mark>

  • <tt id="ikmyk"><u id="ikmyk"></u></tt>
      
      
      1. Home      Log In      Contacts      FAQs      INSTICC Portal
         

        Call for Papers

        ICINCO is sponsored by INSTICC – Institute for Systems and Technologies of Information, Control and Communication

        SCOPE

        The purpose of the 17th International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Four simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Sensors, Systems Modelling and Control, and Industrial Informatics.

        Informatics applications are pervasive in many areas of Control, Automation and Robotics; This conference intends to emphasize this connection, therefore, authors should highlight the benefits of Information Technology (IT) in these areas. Ideas on how to solve problems using IT, both in R&D and industrial applications, are welcome. Papers describing advanced prototypes, systems, tools and techniques and general survey papers indicating future directions are also encouraged. Papers describing original work are invited in any of the areas listed below. Accepted papers, presented at the conference by one of the authors, will be published in the Proceedings of ICINCO, with an ISBN. Acceptance will be based on quality, relevance and originality. Both full research reports and work-in-progress reports are welcome. There will be both oral and poster sessions.

        Special sessions, dedicated to case-studies and commercial presentations, as well as tutorials dedicated to technical/scientific topics are also envisaged: companies interested in presenting their products/methodologies or researchers interested in holding a tutorial, workshop or special session are invited to contact the conference secretariat or visit the conference website.

        CONFERENCE AREAS

        Each of these topic areas is expanded below but the sub-topics list is not exhaustive. Papers may address one or more of the listed sub-topics, although authors should not feel limited by them. Unlisted but related sub-topics are also acceptable, provided they fit in one of the following main topic areas:

        1. INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION
        2. ROBOTICS AND AUTOMATION
        3. SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL
        4. INDUSTRIAL INFORMATICS


        AREA 1: INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION


        • Decision Support Systems
        • Distributed Control Systems
        • Engineering Applications on Intelligent Control Systems and Optimization
        • Evolutionary Computation and Control
        • Fuzzy Control
        • Genetic Algorithms
        • Hybrid Learning Systems
        • Intelligent Fault Detection, Diagnosis and Prognostics
        • Knowledge-Based Systems Applications
        • Machine Learning in Control Applications
        • Neural Networks Based Control Systems
        • Optimization Algorithms
        • Planning and Scheduling
        • Soft Computing
        • Software Agents for Intelligent Control Systems

        AREA 2: ROBOTICS AND AUTOMATION


        • Autonomous Agents
        • Cognitive Approach for Robotics
        • Collective and Social Robots
        • Control and Supervision Systems
        • Engineering Applications on Robotics and Automation
        • Guidance, Navigation and Control
        • Human-Machine Interfaces
        • Humanoid Robots
        • Human-Robots Interfaces
        • Image Processing
        • Industrial Networks and Automation
        • Intelligent Transportation Technologies and Systems
        • Mechatronics Systems
        • Mobile Robots and Intelligent Autonomous Systems
        • Modelling, Simulation and Architecture
        • Network Robotics
        • Perception and Awareness
        • Robot Design, Development and Control
        • Space and Underwater Robots
        • Surveillance, Fault Detection and Diagnosis
        • Telerobotics and Teleoperation
        • Vehicle Control Applications
        • Virtual Environment, Virtual and Augmented Reality
        • Vision, Recognition and Reconstruction

        AREA 3: SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL


        • Adaptive Signal Processing and Control
        • Biological Inspired Sensors
        • Computer and Microprocessor-Based Control
        • Defect and Change Detection and Identification
        • Engineering Applications
        • Environmental Monitoring and Control
        • Information-Based Models for Control
        • Intelligent Components for Control
        • Mechanical, Force and Tactile Sensors
        • Modelling, Analysis and Control of Discrete-Event Systems
        • Modelling, Analysis and Control of Hybrid Dynamical Systems
        • Nonlinear Signals and Systems
        • Optimization Problems in Signal Processing
        • Real-Time Systems Control
        • Sensors Fusion
        • Signal Reconstruction
        • System Identification
        • System Modelling
        • Time-Frequency Analysis

        AREA 4: INDUSTRIAL INFORMATICS


        • Computer-Based Manufacturing Technologies
        • Energy Efficiency and Green Manufacturing
        • Human Factors & Human-System Interface
        • Industrial Automation and Robotics
        • Industrial Internet of Things
        • Intelligent Design and Manufacturing
        • Manufacturing Systems Engineering
        • Performance Evaluation and Optimization
        • Precision Engineering
        • Production Planning, Scheduling and Control
        • Production Tasks' Design, Planning and Management
        • Quality Control and Management
        • Resources and Knowledge Management in Industry
        • Supply Chain and Logistics Engineering
        • Systems Modelling and Simulation

        KEYNOTE SPEAKERS

        Roland SiegwartAutonomous Systems Lab & Wyss Zurich, ETH Zurich, Switzerland
        Eduardo F. CamachoUniversity of Seville, Spain
        Jean-Michel CoronUniversité Pierre et Marie Curie, France

        PAPER SUBMISSION

        Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors’ personal details, the acknowledgments section of the paper and any other reference that may disclose the authors’ identity.

        Only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarism thoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

        Authors can submit their work in the form of a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas. All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.

        PUBLICATIONS

        All accepted papers will be published in the conference proceedings, under an ISBN reference, on paper and on digital support.
        SCITEPRESS is a member of CrossRef (http://www.crossref.org/) and every paper on our digital library is given a DOI (Digital Object Identifier).
        The proceedings will be submitted for indexation by Thomson Reuters Conference Proceedings Citation Index (CPCI/ISI), DBLP, EI (Elsevier Engineering Village Index), Scopus, Semantic Scholar, Google Scholar and Microsoft Academic.

        SECRETARIAT

        ICINCO Secretariat
        Address: Avenida de S. Francisco Xavier, Lote 7 Cv. C
                     2900-616 Setúbal - Portugal
        Tel.: +351 265 520 185
        Fax: +351 265 520 186
        e-mail: icinco.secretariat@insticc.org
        Web: http://www.3g.caolimin.com.cn

        VENUE

        Available soon.

        CONFERENCE CO-CHAIRS

        Kurosh MadaniUniversity of Paris-EST Créteil (UPEC), France
        Janan ZaytoonUniversity of Reims Champagne Ardennes, France

        PROGRAM CHAIR

        Oleg GusikhinFord Motor Company, United States

        PROGRAM COMMITTEE MEMBERS

        Srinivasan A, Caledonian College of Engineering, Galsgow Caledonian University, Oman
        Ghassan Abu-Lebdeh, American University of Sharjah, United Arab Emirates
        Andrew Adamatzky, University of the West of England, United Kingdom
        El-Houssaine Aghezzaf, Ghent University, Faculty of Engineering and Architecture, Belgium
        Eugenio Aguirre, University of Granada, Spain
        Rudy Agustriyanto, University of Surabaya, Indonesia
        Qingsong Ai, Wuhan University of Technology, China
        Carlos Aldana, University of Guadalajara, Mexico
        Manuel Aleixandre, Tokyo Institute of Technology, Japan
        Adel Al-Jumaily, University of Technology Sydney, Australia
        Erdinç Altug, Istanbul Technical University, Turkey
        Yacine Amirat, University Paris Est Créteil (UPEC), France
        Mihail Antchev, Technical University - Sofia, Bulgaria
        Rui Araujo, University of Coimbra, Portugal
        Gustavo Arroyo-Figueroa, Instituto Nacional de Electricidad y Energías Limpias, Mexico
        T. Asokan, Indian Institute of Technology Madras, India
        Mohamed Amine Atoui, Lab-STICC, France
        Augusto Luis Ballardini, Universita degli studi di Milano Bicocca, Italy
        Alfonso Baños, Universidad de Murcia, Spain
        Ramiro Barbosa, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
        Guilherme Barreto, Universidade Federal do Ceará, Brazil
        Dennis Barrios-Aranibar, Universidad Católica San Pablo, Peru
        Marcelo Becker, Escola de Engenharia de S?o Carlos, Brazil
        Carsten Behn, Schmalkalden University of Applied Sciences, Germany
        Faïz Ben Amar, Université Pierre et Marie Curie, Institut Systèmes Intelligents et de Robotique, France
        Lyes Benyoucef, Aix-Marseille University, France
        Karsten Berns, University of Kaiserslautern, Germany
        Arijit Bhattacharya, University of East Anglia, United Kingdom
        Reinaldo Bianchi, Centro Universitario da FEI, Brazil
        Mauro Birattari, Université Libre de Bruxelles, Belgium
        Jean-Louis Boimond, ISTIA - LARIS, France
        Magnus Boman, The Royal Institute of Technology, Sweden
        Glen Bright, University of KwaZulu-Natal, South Africa
        Marvin Bugeja, University of Malta, Malta
        Kevin Burn, University of Sunderland, United Kingdom
        Kenneth Camilleri, University of Malta, Malta
        Bin Cao, Hebei University of Technology, China
        Alessandro Casavola, University of Calabria, Italy
        Marco Castellani, University of Birmingham, United Kingdom
        Jaime Cerda, Universidad Michoacana de San Nicolas de Hidalgo, Mexico
        Yuh-Min Chen, National Cheng Kung University, Taiwan, Republic of China
        Albert Cheng, University of Houston, United States
        Paul Christodoulides, Cyprus University of Technology, Cyprus
        Feng Chu, University of Evry Val d'Essonne, France
        Daisuke Chugo, Kwansei Gakuin University, Japan
        Carlos Coello, CINVESTAV-IPN, Mexico
        Armando Colombo, Schneider Electric GmbH, France
        James Conrad, University of North Carolina at Charlotte, United States
        Yechiel Crispin, Embry-riddle Aeronautical University, United States
        Erik Cuevas, Universidad de Guadalajara, Mexico
        José Cunha, University of Trás-os-montes and Alto Douro, Portugal
        Debi Das, Institute Minerals Materials Technology, India
        Manohar Das, Oakland University, United States
        Angel Del Pobil, Universitat Jaume I, Spain
        Kyriakos Deliparaschos, Cyprus University of Technology, Cyprus
        Mingcong Deng, Tokyo University of Agriculture and Technology, Japan
        Guilherme DeSouza, University of Missouri, United States
        Paolo Di Giamberardino, Sapienza University of Rome, Italy
        Alexandre Dolgui, IMT Atlantique, France
        Hans Doran, Zurich University of Applied Sciences, Switzerland
        António Dourado, University of Coimbra, Portugal
        Vasile Dragan, Romanian Academy, Romania
        Venky Dubey, Bournemouth University, United Kingdom
        Ioan Dumitrache, University “POLITEHNICA” of Bucharest, Romania
        Guy Dumont, UBC, Canada
        Richard J. Duro, Universidade Da Coru?a, Spain
        Marc Ebner, Ernst-Moritz-Arndt-Universit?t Greifswald, Germany
        Petr Ekel, Pontifical Catholic University of Minas Gerais, Brazil
        Krystian Erwinski, Institute of Engineering and Technology, Nicolaus Copernicus University Poland, Poland
        Simon Fabri, University of Malta, Malta
        Mohammed Fadali, UNR, United States
        Christophe Farges, Bordeaux University, IMS – UMR 5218 CNRS, France
        Manuel Ferre Perez, Universidad Politecnica Madrid, Spain
        Paolo Fiorini, University of Verona, Italy
        Juan Flores, University of Michoacan, Mexico
        Mauro Franceschelli, Università di Cagliari, Italy
        Georg Frey, Chair of Automation and Energy Systems, Saarland University,, Germany
        Toyomi Fujita, Tohoku Institute of Technology, Japan
        Mauro Gaggero, National Research Council of Italy, Italy
        Iván García Daza, University of Alcalá, Spain
        Maria Garcia-Planas, Universitat Politecnica de Catalunya, Spain
        Wojciech Giernacki, Poznan University of Technology/ Institute of Control, Robotics and Information Engineering, Poland
        Paulo Gil, Universidade Nova de Lisboa, Portugal
        Giuseppina Gini, Politecnico di Milano, Italy
        Luis Gomes, UNL/UNINOVA, Portugal
        Arthur Gómez, Universidade do Vale do Rio dos Sinos, Brazil
        Lucian Grigorie, Military Technical Academy ''Ferdinand I'', Bucharest, Romania
        Mathieu Grossard, Atomic Energy and Alternative Energies Commission, France
        Lech Grzesiak, Warsaw University of Technology, Poland
        Jan Haase, Helmut Schmidt University of the Federal Armed Forces Hamburg, Germany
        Maki Habib, The American University in Cairo, Egypt
        Kensuke Harada, Osaka University, Japan
        Jennifer Harding, Loughborough University, United Kingdom
        Arturo Hernández - Aguirre, Centre for Research in Mathematics, Mexico
        Noelia Hernández Parra, Universidad de Alcalá, Spain
        Yasuhisa Hirata, Tohoku University, Japan
        Wladyslaw Homenda, Warsaw University of Technology, Poland
        Zeng-Guang Hou, Chinese Academy of Sciences, China
        Hesuan Hu, Xidian Univ., China
        Daniela Iacoviello, Sapienza University of Rome, Italy
        Koji Ikuta, University of Tokyo, Japan
        Gianluca Ippoliti, Università Politecnica delle Marche, Italy
        Dmitry Ivanov, Berlin School of Economics and Law, Germany
        Sarangapani Jagannathan, Missouri University of Science and Technology, United States
        Michael Jenkin, York University, Canada
        Myong Jeong, Rutgers University, United States
        Wootae Jeong, Korea Railroad Research Institute, Korea, Republic of
        Isabel Jesus, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
        Márcio José da Cunha, Federal University of Uberlandia, Brazil
        Fabrício Junqueira, University of S?o Paulo (USP), Brazil
        Michail Kalogiannakis, University of Crete, Greece
        Pavan Kumar Kankar, Indian Institute Technology Indore, India
        Tohru Kawabe, University of Tsukuba, Japan
        Rafael Kelly, CICESE Research Center, Mexico
        DaeEun Kim, Yonsei University, Korea, Republic of
        Jonghwa Kim, University of Science & Technology, Korea, Republic of
        George Kovács, Hungarian Academy of Sciences, Hungary
        S. Kozaitis, Florida Institute Technology, United States
        Krzysztof Kozlowski, Poznan University of Technology, Poland
        Ondrej Krejcar, University of Hradec Kralove, Czech Republic
        Masao Kubo, Narional Defense Academy of Japan, Japan
        Kolja Kühnlenz, Coburg University of Applied Sciences and Arts, Germany
        Halina Kwasnicka, Wroclaw University of Technology, Poland
        Sébastien Lahaye, Istia - LARIS, France
        H. Lam, King's College London, United Kingdom
        Kauko Leiviskä, University of Oulu, Finland
        Roland Lenain, Irstea, France
        Fabrizio Leonardi, FEI University, Brazil
        Rory Lewis, University of Colorado, United States
        Tsai-Yen Li, National Chengchi University, Taiwan, Republic of China
        Christos Liambas, , Greece
        Hualou Liang, Drexel University, United States
        Huei-Yung Lin, National Chung Cheng University, Taiwan, Republic of China
        Kai Liu, The University of Liverpool, United Kingdom
        Ángel Llamazares, Universidad de Alcalá, Spain
        ChuKiong Loo, University of Malaya, Malaysia
        Antonio Lopes, University of Porto, Portugal
        Sérgio Lopes, University of Minho, Portugal
        Gonzalo Lopez-Nicolas, Universidad de Zaragoza, Spain
        Ping Lou, Wuhan University of Technology, China
        Yu-Shen Lu, National Taiwan Normal University, Taiwan, Republic of China
        Eric Lucet, CEA -French Alternative Energies and Atomic Energy Commission, France
        Martin Lukac, Nazarbayev University, Kazakhstan
        Danilo Maccio, National Research Council of Italy, Italy
        José Machado, Institute of Engineering, Polytechnic of Porto, Portugal
        Douglas Macharet, Universidade Federal De Minas Gerais, Brazil
        Anthony Maciejewski, Colorado State University, United States
        Ana Madureira, ISEP/IPP, Portugal
        Magdi Mahmoud, King Fahd University of Petroleum and Minerals, Saudi Arabia
        Om Malik, University of Calgary, Canada
        Philippe Martinet, INRIA, France
        Tariq Masood, University of Cambridge, United Kingdom
        Ross McAree, University of Queensland, Australia
        Seán McLoone, Queen's Unviersity Belfast, Ireland
        Wenchao Meng, Carleton University, Canada
        Nadhir Messai, CReSTIC, France
        Konstantinos Michail, Cyprus University of Technology, Cyprus
        Sanya Mitaim, Thammasat University, Thailand
        Dusmanta Kumar Mohanta, Birla Institute Technology Mesra Ranchi, India
        Francesco Morabito, University Mediterranea of Reggio Calabria, Italy
        Vladimir Mostyn, VSB - Technical University of Ostrava, Czech Republic
        Vassilis Moulianitis, University of the Aegean, Greece
        George Moustris, National Technical University of Athens, Greece
        Riccardo Muradore, University of Verona, Italy
        Saeid Nahavandi, Deakin University, Australia
        Cairo Nascimento, Instituto Tecnológico de Aeronáutica, Brazil
        Andreas Nearchou, University of Patras, Greece
        Juan J. Nieto, University of Santiago de Compostela, Spain
        Shimon Nof, Purdue University, United States
        Ivan Nunes da Silva, University of S?o Paulo, Brazil
        Fernando Osorio, USP - Universidade de Sao Paulo, Brazil
        Stamatis Papadakis, University of Crete, Greece
        Ju H. Park, Yeungnam University, Korea, Republic of
        Igor Paromtchik, INRIA, France
        Ignacio Parra-Alonso, University of Alcalá, Spain
        Federica Pascucci, Roma Tre, Italy
        Pierre Payeur, University of Ottawa, Canada
        Dariusz Pazderski, Poznan University of Technology, Poland
        Qingjin Peng, University of Manitoba, Canada
        Fernando Pereira, University of Porto, Portugal
        Carlos Pereira, Federal University of Rio Grande Do Sul - UFRGS, Brazil
        D. Pham, The University of Birmingham, United Kingdom
        Son Phung, University of Wollongong, Australia
        Aurelio Piazzi, Università degli Studi di Parma, Italy
        S. Ponnambalam, University Malaysia Pahang, Malaysia
        Nirvana Popescu, University Politehnica of Bucharest, Romania
        Raul Marin Prades, Jaume I University, Spain
        Radu-Emil Precup, Politehnica University of Timisoara, Romania
        Libor Preucil, Czech Technical University in Prague, Czech Republic
        Xiaobo Qu, Xiamen University, China
        Gobithaasan R.U., University Malaysia Terengganu, Malaysia
        José Ragot, Centre de Recherche en Automatique de Nancy, France
        Muhammad Asif Zahoor Raja, COMSATS University Islamabad, Pakistan
        Akshay Rajhans, MathWorks, United States
        Oscar Reinoso, Miguel Hernandez University, Spain
        Mihailo Ristic, Imperial College London, United Kingdom
        Roseli Romero, University of S?o Paulo, Brazil
        Juha Röning, University of Oulu, Finland
        Hubert Roth, University Siegen, Germany
        António Ruano, University of Algarve, Portugal
        Yassine Ruichek, Université de Technologie Belfort-Montbeliard, France
        Jocelyn Sabatier, IMS Laboratory - Bordeaux University, France
        Christophe Sabourin, IUT Sénart, University Paris-Est Creteil (UPEC), France
        Carlos Sagüés, Universidad de Zaragoza, Spain
        Mehmet Sahinkaya, Kingston University London, United Kingdom
        Priti Sajja, Sardar Patel University, India
        Antonio Sala, Universidad Politecnica de Valencia, Spain
        Addisson Salazar, Universitat Politècnica de València, Spain
        Abdel-Badeeh Salem, Ain Shams University, Egypt
        VEERA RAGAVAN Sampath Kumar, , Malaysia
        Marcello Sanguineti, University of Genoa, Italy
        Nilanjan Sarkar, Vanderbilt University, United States
        Jurek Sasiadek, Carleton University, Canada
        Daniel Sbarbaro, Universidad de Concepcion, Chile
        Daniel Schmidt, SEW EURODRIVE GmbH, Germany
        Gerald Seet, Nanyang Technological University, Singapore
        João Sequeira, Instituto Superior Técnico, Portugal
        Roman Sergienko, Gini GmbH, Germany
        Madhavan Shanmugavel, SRM Institute of Science and Technology, India
        Jinhua She, Tokyo University of Technology, Japan
        Bijan Shirinzadeh, Monash University, Australia
        Michael Short, Teesside University, United Kingdom
        Manuel Silva, ISEP-Instituto Superior de Engenharia do Porto, Portugal
        Carlos Silvestre, University of Macau, China, and Instituto Superior Técnico, Universidade de Lisboa, Portugal, China
        Vasile Sima, National Institute for Research & Development in Informatics, Romania
        Dan Simon, Cleveland State University, United States
        Daniel Simon, INRIA, France
        Arpita Sinha, IIT Bombay, India
        Adam Slowik, Koszalin University of Technology, Poland
        Andrzej Sluzek, Khalifa University, United Arab Emirates
        Gustavo Soares, PUC-MG, Brazil
        Stefano Squartini, Università Politecnica delle Marche, Italy
        J. Stigter, Wageningen University, Netherlands
        Olaf Stursberg, University of Kassel, Germany
        Raúl Suárez, Universitat Politecnica de Catalunya (UPC), Spain
        Les Sztandera, Jefferson (Philadelphia University + Thomas Jefferson University), United States
        Tianhao Tang, Shanghai Maritime University, China
        Tomasz Tarczewski, Nicolaus Copernicus University, Poland
        Abdelhamid Tayebi, Lakehead University, Canada
        Hakan Temeltas, Istanbul Technical University, Turkey
        Daniel Thalmann, Ecole Polytechnique Federale de Lausanne, Switzerland
        Gui Tian, Newcastle University, United Kingdom
        Geetam Tomar, Machine Intelligence Research Labs, India
        Germano Torres, PS Solutions, Brazil
        Wa-Muzemba Tshibangu, Morgan State University, United States
        Nikos Tsourveloudis, Technical University of Crete, Greece
        Ali Turgut, Middle East Technical University, Turkey
        José Valente de Oliveira, Universidade do Algarve, Portugal
        Roberto Valenti, MathWorks, United States
        Antonis Vardulakis, Aristotle University of Thessaloniki, Greece
        César Vargas Rosales, ITESM - Monterrey, Mexico
        Ramiro Velazquez, Universidad Panamericana, Mexico
        Douglas Vieira, ENACOM, Brazil
        Hugo Vieira Neto, Federal University of Technology - Paraná, Brazil
        Arnoud Visser, Universiteit van Amsterdam, Netherlands
        Ljubo Vlacic, Griffith University, Australia
        Damir Vrancic, Jo?ef Stefan Institute, Slovenia
        Bernardo Wagner, Leibniz Universit?t Hannover, Germany
        Feng Wan, University of Macau, Macau
        Peiliang Wang, Huzhou University, China
        Qian Wang, Manhattan College, University of Iowa, United States
        Jingyu Wang, Northwestern Polytechnical University (NPU), China
        Long Wang, Peking University, China
        Warren White, Kansas State University, United States
        Min Wu, China University of Geosciences, China
        Farouk Yalaoui, University of Technology of Troyes, France
        Qinmin Yang, Zhejiang University, China
        Qiangda Yang, Northeastern University, China
        Weiwei Yu, Northwestern Polytechnical University, China
        Marek Zaremba, Université du Québec (UQO), Canada
        Jie Zhang, Newcastle University, United Kingdom
        Primo Zingaretti, Università Politecnica delle Marche, Italy
        Alois Zoitl, Johannes Keppler University, Austria
        Ming Zuo, University of Alberta, Canada

        (list not yet complete)

        footer
        <meter id="ikmyk"><strong id="ikmyk"><s id="ikmyk"></s></strong></meter>
        <small id="ikmyk"></small>
        <mark id="ikmyk"><u id="ikmyk"><span id="ikmyk"></span></u></mark>

      2. <tt id="ikmyk"><u id="ikmyk"></u></tt>
          
          
          1. 皇冠比分网址

            用户登录乐购100彩票

            锐泰彩票平台

            盛泰彩票注册

            菠菜竞彩app

            90比分网

            bet36网站

            蚂蚁彩票购彩大厅

            五福彩票官网